Connecting To A Network; Wireless Security - Samsung 6 Serie Manual De Usuario

You can connect your TV to your local area network (LAN) using a wired or wireless connection.
✎
After you have "physically" connected your TV to your network, you must configure the network connection to complete
the process. You can configure the connection during the Initial Setup process (see page 10 ) or after the Initial Setup
process, through the TV's menu (see page 15).
The Wireless Network Connection
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first
attach a "Samsung Wireless LAN Adapter" (WIS09ABGNX, WIS12ABGNX - sold separately) to the
your TV. See the illustration below.
The LAN Port on the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, E-commerce sites, and Samsungparts.
com. Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung
recommends using IEEE 802.11n. When you play video over a network connection using one of the other protocols, the video
may not play smoothly.

Wireless Security

Most wireless network systems incorporate a security system that requires devices that access the network through an access
point or AP (typically a wireless router or modem) to transmit an encrypted security code called an access key.
Your TV is compatible with the following security protocols:
y Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
y Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or TKIP on your AP or
wireless router, your TV will not support a connection, in compliance with new Wi-Fi certification specifications.
[UE6030-ZX]BN68-04458C.indb 7

Connecting to a Network

Wireless IP Sharer
(AP having DHCP Server)
LAN Cable (Not Supplied)
English - 7
USB port on the side of
Samsung Wireless
TV Side Panel
LAN Adapter
2012-05-21 11:18:49