Publicidad
Idiomas disponibles
Idiomas disponibles
Locate the Buck Stove Fire Pit in an area that has NO COMBUSTIBLES WITHIN (8') EIGHT FOOT
SQUARE area, with NO COMBUSTIBLES OVER HEAD.
NOTE: The manufacturer recommends that for maximum performance burn natural seasoned hard
wood. Remove the screen lid from the fire pit. Lay several pieces of dry kindling on top of newspaper, on
wood grate. Place several pieces of natural seasoned hard wood or hickory wood on kindling. Light
newspaper. Don't leave fire unattended at this point. After embers and a coal bed have been established, load
fire pit with seasoned natural hard wood as desired for cooking. Place the Buck Stove Fire Pit Grill over the
fire pit as shown in picture below, making sure bent part of placement brackets are inside fire pit. Your Buck
Stove Fire Pit Grill is ready for use. Your fire pit cooking grill has an opening in the rear for adding additional
wood fuel.
REAR
LOAD
WOOD
PLACEMENT
BRACKETS
INSTALLING BUCK STOVE FIRE PIT GRILL
NOTE: Always keep safety in mind when
disposing hot ashes. Pour water on them
until out. Dig a hole and bury ashes,
transport ashes using metal container with
lid.
NOTE: For cleaning, remove cooking
grate and remove fire shield. Clean fire
shield, then replace fire shield, then
cooking grate.
FRONT
COOKING
GRATE
FIRE SHIELD
Publicidad
