Important; End Of Operation/Storage; Technical Service; Maintenance Schedule - Campbell Hausfeld HU350899 Manual De Instrucciones Y Lista De Piezas

1. Remove bolt.
2. Remove the fi lter cover and fi lter element. Inspect each
piece.
3. If the fi lter element is dirty or clogged, replace it.
4. Reinstall fi lter, cover, and bolt.
IMPORTANT: Locate unit as far from spraying area as hose will
allow to prevent overspray from clogging filter.
Figure 8 - Intake Filter Maintenance

END OF OPERATION/STORAGE

1. Turn AUTO/OFF switch to the OFF position.
2. Unplug power cord from wall outlet and wrap around
handle to prevent damage when not in use.
3. Wearing safety glasses drain tank of air by pulling the ring
on the safety valve. Use other hand to deflect fast moving
air from being directed toward your face.
4. Drain tank of condensation by opening drain valve on
bottom of tank. Tank pressure should be below 10 psi
when draining tank.
5. Air hose should be disconnected from compressor and
hung open ends down to allow any moisture to drain.
6. Compressor and hose should be stored in a cool, dry place.

TECHNICAL SERVICE

For information regarding the operation or repair of this
product, please call 1-800-543-6400.

MAINTENANCE SCHEDULE

OPERATION
Drain tank
Check air fi lter
Check safety valve
Clean unit
Filter
Cover
●
●
●
●
7
HU350899
www.campbellhausfeld.com