Using Minitek With A Line-In Audio Input; Using Minitek With A Third Party Bluetooth Transmitter - Siemens Tek Manual De Instrucciones

Using miniTek with a line-in
audio input
WARNING
Risk of injuries caused by electric shock!
• Connect audio input only to a device conforming to IEC
60065
(IEC-Norm for audio, video and other electronic devices).
Note: While charging, do not use the line-in audio input with
devices that are connected to the power supply.
• Press for about 3 seconds to turn miniTek on.
• Use the supplied cables and adapters to connect the external
device and miniTek.
• Press to change to the audio program (see chapter
"Getting Started" for information about the sequence of
external sources).
If you press without an audio device connected to it,
miniTek will search for a connection to other audio sources.
22
All manuals and user guides at all-guides.com
P
Using miniTek with a third
party Bluetooth transmitter
miniTek can be connected via Bluetooth with a third party
Bluetooth transmitter (e.g. iPhone, iPod, BlackBerry, MP3 player,
laptop).
Pairing
• Press for about 3 seconds to turn miniTek on.
• Activate the Bluetooth function in your device.
• Press on your miniTek for more than 5 seconds to
prepare your miniTek for pairing.
When pairing mode has been activated, all 3 buttons (on/off
button, telephone button and audio source button) shine for 3
seconds, then the telephone button flashes.
• In the menu of your device choose "Bluetooth setup".
• Choose "RCU Connect" to pair miniTek and the third party
Bluetooth transmitter.
• Enter the PIN "0000" if requested.
Using
• Start the audio transmission on your device.
You can now hear sound from your device through your hearing
instruments via Bluetooth.
• If the sound does not start automatically press
to the audio program (see chapter "Getting Started" for
information about the sequence of external sources).
Note: Refer to the user guide of your connected device for more
detailed information on how to link devices via Bluetooth.
to change
23