Toparc 057623 Manual De Instrucciones página 6

translation of original instructions
APPLICATION
The PNEUMATIC KNIFE is an oscillating tool designed for cutting windshield seals.
Any other use of this tool is strongly discouraged.
Use only blades in perfect condition compatible with the PNEUMATIC KNIFE.
REPLACEMENT OF THE BLADE
1
Unscrew the above screw using a hexagonal wrench supplied with the pneumatic knife.
2
Remove the centering ring. Be careful, the centering ring must be kept and replaced each time the blade is changed.
Blade 57 mm
Réf : 057845
Blade 90 mm
Réf : 057852
Blade 35 mm
Réf : 057838
Blade 8 mm
Réf : 057876
Blade U 36 mm
Réf : 057869
MAINTENANCE
• At the beginning of the day and before a prolonged period of no use, pour a few drops of specialist oil directly into the hole. Do not use flam-
mable liquids such as gasoline and diesel.
• Regularly check the condition of the regulating filter and the oil level in the lubricator of the air system.
• Ensure that the supply connections, piping and accessories are in perfect condition. Regularly drain the compressor pipes and tank. Keep the limit
date in mind.
• Only original parts available from the supplier may be used for tool maintenance.
• The company JBDC cannot be held responsible for changes made to the tools and non-compliance with general safety rules r
• Si l'outil pneumatique émet une forte vibration, remplacer la lame probablement endommagé ou usé.
6
PNEUMATIC KNIFE
2
1
EN