Sleep Timer; Parental Lock - Nevir NVR-2580D Manual De Instrucciones

Wakeup Channel:
If a timer is enabled and a wakeup channel is preset, the system will start showing the preset channel as
the program wakes up.
Use / button to select,
Note: A receiver of which the standby consumption is less than 1 Watt dose not support such function
setting.
Month: 1, 2, 3, ~ 10, 11, 12.
It can be set only when Timer Mode is set to Once, and it means that in which month of the year the
program will wakes up.
Use / button to select,
Date: 1, 2, 3, ~ 30, 31.
It can be set with Timer Mode set to either Once or Monthly and means on which date the program will
wake up.
Use / button to select,
Day: Sunday, Monday, Tuesday, Wednesday, Thursday, Friday or Saturday.
It can only be set with Timer Mode set to Weekly and means on which day the program will wake up.
Use / button to select,
Start Time:
End Time:
Set the exact start and end time when the preset program wakes up and stops according to the clock
system of the receiver.
Use / button to select, OK button to enter or confirm,
buttons to input the reasonable time value and EXIT button to exit.

3.4.2 Sleep Timer

Select and open the submenu Sleep Timer:
Sleep Timer: Off, 10 Min, 30 Min, 60 Min, 90 Min or 120 Min.
Once a sleep timer is enabled (at least 10 minutes), it implies that the receiver will go to sleep in certain
period of time. Use
exit.
Remains:
It indicates how much time is left before the receiver goes to sleep once a sleep timer is enabled.
3.5 OSD Setting
Select and open this submenu:
Subtitle Display: Standard/ Teletext / Off.
There are two types of subtitle display if it is enabled. Use
OK button to enter, EXIT button to exit.
OSD Transparency: Off, 10%, 20%, 30%, 40% and 50%.
User can choose any level of OSD transparency as preferred to and such setting makes it possible to
conduct some setting operation without missing program. Use
change, OK button to enter, EXIT button to exit.
Load Default OSD Setting:
User can select this submenu and press OK button to cancel all changes to OSD parameters and load the
default settings.

3.6 Parental Lock

button to change, OK button to enter, EXIT button to exit.
/
button to change, OK button to enter, EXIT button to exit.
/
button to change, OK button to enter, EXIT button to exit.
/
button to change, OK button to enter, EXIT button to exit.
/
/ button to select, /
/ button to move the cursor, Numeric
button to change, OK button to enter, EXIT button to
/ button to select,
/ button to select,
13
button to change,
/
button to
/