Termozeta silency Libro De Instrucciones página 14

ŸŸŸ
ENGLISH
- Brush with two positions (19)
(hard floors/mats-carpets)
Can be used with the bristles extended for smooth hard surfaces
(e.g. tiles), or with the bristles retracted for carpets and mats. Use
the pedal button (20) of the brush in order to extract or retract the
bristles.
- Brush for parquet floors (21)
Can be connected to the extension tube and allows vacuuming
parquet floors.
- Nozzle with removable bristles (23)
Can be connected directly to the flexible tube or to the extension
tube.
It allows vacuuming upholstery or curtains. It can be used with or
without bristles: to extract the bristles, remove the unit from this
nozzle.
- Crevice nozzle (22)
Can be connected directly to the handle of the flexible tube or to the
extension tube. It allows cleaning in places which are difficult to
reach (corners, interstices, radiators, etc.).
OPERATION
• Make sure the dustbag-filter (13) is correctly lodged in the proper
seat. For further information, read the "Changing the dustbag-filter"
section.
• Pull out the feeding cable to its fullest extend and insert the plug into
the power outlet.
• Press the switch (2) in order to start the appliance.
• The vacuum cleaner is provided with an indicator (5) informing
when the dustbag-filter is full. When the indicator (5) changes its
colour, replace the dustbag-filter
according to the instructions of the
"Replacement of the dustbag-filter"
section.
ELECTRONIC POWER ADJUSTMENT
During the use, it is possible to change
the suction power.
Fig. G
5
4