Tabla de contenido
Publicidad
3. Click General and select PoE Injector.
Note:
The option to select PoE Injector will only appear if
the switch is actually powered by a PoE injector.
4. Click Confirm if the USW-Flex is powered by a PoE Adapter
with a power rating of 50V/60W or better. Otherwise, click
Cancel and replace the PoE Adapter with one that does
have a power rating of 50V/60W or better.
5. Once confirmed, click Save under the General section, to
complete the installation.
Publicidad
Tabla de contenido
