Chauvet Circus 2.0 IRC Guía De Referencia Rápida página 4

Circus™ 2.0 IRC QRG
Overview
(Back)
AC Power
Power Linking
Fuse
Replacement
Infrared Remote
Control (IRC)
Display
Safety Loop
Microphone
Microphone Sensitivity
Adjustment Knob
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
You can link up to 42 Circus™ 2.0 IRC products at 120 VAC and 78 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The Circus™ 2.0 IRC is fully compatible with the Infrared Remote Control
(IRC) from CHAUVET®. For more information on the IRC or to download
instructions, go to www.chauvetlighting.com.
Fuse Holder
Power Out
4
EN
Control Buttons
DMX In
DMX Out
Power In
Back Panel View