Changing The Infrared Lamp; Cleaning And Care Of The Unit; Disposal; Technical Specifications - Boso Bosch+Sohn bosotherm 5100 Instrucciones Para El Uso

Notified body:
ECS European Certification Service GmbH
Hüttfeldstraße 50
73430 Aalen, Germany
Identification number: 1883
EU declaration of conformity: http://sanitas-online.de/web/de/landingpages/cedeclarationofconformity.php

7. Changing the infrared lamp

The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and chan-
ging the infrared heat lamp.
Please note that only infrared lamps of the original type may be used as replacements.
Replacement infrared lamp (type)
Infrared PAR 38 (150 W)
Warning
• Do not touch the infrared lamp or unscrew it when it is connected to the mains.
• Unplug the device, to avoid the risk of electrocution.
• In the interest of environmental protection, do not dispose of the device in household waste.

8. Cleaning and care of the unit

The unit should be cleaned occasionally.
Important
To avoid odours caused by fluff and dust, we recommend regularly cleaning the device as follows:
• The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and
changing the infrared heat lamp.
• Ensure that no water penetrates inside the unit!
• Do not wash the unit in a washing machine!
Clean using a damp cloth, to which you can apply a little detergent if necessary.
• Do not use abrasive detergents and never immerse the unit in water. Do not touch the unit with wet hands
while it is plugged in; do not allow any water to be sprayed onto the unit.
• The unit must be operated only when it is completely dry.

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.

10. Technical specifications

Mains connection
Power consumption
Max. radiation intensity
Dimensions (W x H x D)
Weight
Operating conditions
Storage and transport
Expected operating life of the device
Standby consumption
Subject to technical modifications. The serial number is located on the device or in the battery compartment.
: :
Specifications
230V ~ 50 Hz
220-230 V~ / 50-60 Hz
150 W
550 W/m at distance of 80 cm
2
145 x 220 x 175 mm
approx. 800 g
Temperature: +5°C to +35°C; Relative humidity: 15%-93%
Temperature: -25°C to +70°C; Relative humidity: ≤93%
7 years
< 0.5 watts
14
Item number:
616.51