Better Homes and Gardens BH40-084-902-50 Guia De Inicio Rapido página 4

ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Place Table Top (A) upside down on a smooth & protective surface as shown in the detail #1.
3. Attach 4 Legs (B) to the apron corners of Table Top (A) by inserting the Hanger Bolts pre-attached on
Leg through the pre-drilled holes on corner block, and fit Flat Washer (3), Lock Washer (2) and Nut (1)
onto each Hanger Bolt, then securely tighten the Nuts with the provided Open Wrench. See detail #1.
4. Stand the unit upright.
'
Description:
Sketch
Qty.
Tools required: Open Wrench
Please call for replacement parts or assistance:
Whalen Furniture Mfg. Inc.
Assembly Instructions
DO NOT fully-tighten the nuts or bolts initially until all the nuts or bolts are
Required hardware in this step
(1) - Nut
(8 pcs)
(2) - Lock Washer
(8 pcs)
1-866-942-5362
Factory No. 75-14697
Stock # BH40-084-902-50
(3) - Flat Washer
(8 pcs)
Page 4