Important safety and
1
environmental instructions
1.5 Plug Wiring
The moulded plug on this appliance incorporates a 13 A fuse. Should the
fuse need to be replaced an ASTA approved BS1362 fuse of the same rat-
ing must be used. Do not forget to refit the fuse cover. In the event of los-
ing the fuse cover, the plug must not to be used until a replacement fuse
cover has been fitted. Colour of the replacement fuse cover must be the
same colour as that visible on the pin face of the plug Fuse covers are avai-
labe from any good electrical store.
Fiting a different plug
•
As the colours of the wires in the mains lead of this appliance may
•
not correspond with the coloured markings identifying the termi-
nals on your plug, proceed as follows:
Brown cable = L (Live)
•
Blue cable = N (Neutral)
•
Green/yellow cable must be connected to ground (E)
•
With the alternative plugs a 13 A fuse must be fitted either in the
•
plug or adaptore or in the main fuse box. If in doubt contact a quali-
fied electrician.
line
17 / EN