Important Safety Instructions; Installation Instructions - Telstar TMB056210MD Manual De Intrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS

WARNING
• Read all instructions before using the Wine/Beverage Cooler.
• DANGER or WARNING: Risk of child entrapment.
• Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still
dangerous . . . even if they will "just sit in the garage a few days".
• Before you throw away your old Wine/Beverage Cooler: take off the doors. Leave the shelves in place so
that children may not easily climb inside.
• Never allow children to operate, play with, or crawl inside the Wine/Beverage Cooler.
• Never clean Wine/Beverage Cooler parts with flammable fluids. The fumes can create a fire hazard or
explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.

INSTALLATION INSTRUCTIONS

1. Before Using Your Wine/Beverage Cooler
• Remove the exterior and interior packing.
• Before connecting the Wine/Beverage Cooler to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
2. Installation of Your Wine/Beverage Cooler
• This appliance is designed to be free standing only, and should not be recessed or built-in (fully recessed).
• Place your Wine/Beverage Cooler on a floor that is strong enough to support it when it is fully loaded. To level
your Wine/Beverage Cooler, adjust the adjustable leg at the bottom of the unit.
• Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to
cool the compressor.
• Locate the Wine/Beverage Cooler away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
Extreme cold ambient temperatures may also cause the unit not to perform properly.
To reduce the risk of fire, electrical shock, or injury
when using your Wine/Beverage Cooler, follow these
basic precautions:
-Save these instructions-
11
11
WINE COOLER
TMB056210MD

Publicidad

Tabla de contenido
loading

Tabla de contenido