Inserting / Replacing Batteries - Makita SK102 Manual De Instrucciones

User Manual
English
Congratulations on your purchase of the
Makita SK102.
The safety instructions follow the
section on how to operate the
instrument. Before starting up the
instrument for the first time, please
read through the entire User Manual paying special
attention to the section Safety Instructions .
Notice: There are drawings on the first and last page
of the User Manual. Unfold these pages while reading
through the User Manual. The letters and numbers in
{} always refer to these drawings.
Contents
Start up
................................................................ 1
Operation
............................................................. 1
Technical data
..................................................... 5
Safety instructions
............................................. 5
Makita SK102
Start up

Inserting / replacing batteries

Refer to drawing {C} - slide the locking button
forward to unlatch the battery compartment. Open
the battery compartment cover and insert the
batteries true to side. Press the battery cover back
down until the lock engages.
The battery symbol {B, 9} lights up when the battery
voltage is too low. Replace the battery as soon as
possible.
• Insert the batteries true to side
• Only use Alkaline batteries
• Remove the batteries if the instrument will not be
used for a long period of time (to prevent corro-
sion)
Operation
Keypad and control elements
Refer to drawing {B }:
1 LASER ON/OFF key
2 PULSE/POWERSAVE MODE key
3 Lock switch
1
D
EN
F
I
E
P
NL
FIN
PL
SK
HR
SR
RUS
BG
RO
Start up