Descargar Imprimir esta página

Technical Specifications; Operational Instructions - Triton Blue TR-MP-574 Manual De Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTION MANUAL
Technical Specifications:
Item Code:
TR-MP-574
Name:
BUBBLE MACHINE
Volt:
AC 120V/60Hz , 230V/50Hz
Fuse:
125V/1A, 250V/0.5A
Motor:
AC 120V/240V 20~24RPM
Weight:
3.8kg
Size:
272 x 240 x 250 mm
II. Operational Instructions:
1.- Unpack the carton to check if there is any damaged or missing parts when you receive the unit, call
the local dealer if anything is found not in a normal condition.
2.- Check that the rated power corresponds to the main supply.
III. MANUAL INSTRUCTION
1. - Putting the bubble machine on horizontal level, in stable condition, no exceeding 10 degree.
2. - Putting liquid in fog bucket.
3. - Switch on then can produce bubbles.
4. - Turn off when not in usage.
IV Caution:
1. - In order to reach a maximum of safety the following points should be carefully read and observed.
2. - The machine maximum tilting no more than 10 degree.
3. - Using qualified liquid.
4. - No mixing with flammable chemical.
5. - When adding liquid, the liquid should only reach the marked level otherwise will cause short cut in
circuit.
6. - Turn off the switch while changing fuse or adding liquid.
7. - Ambient temperature should not exceed 50
8. - Call professionals for maintenance, no spare parts are included with the unit.
9. - Please be sure to mount bubble machine only as shown on the picture below, means hanging on
the bracket; Additionally, you can use a stable base for the fixing of the bubble machine.
10. - Please ask an approved electrician because of special national requirements for electrical
installation. No operation without proof by skilled electrician in public areas!
11. - Alternative precautions to switch off the device shall be taken if it is not easy to reach the socket.
(E.g. additional disconnection device)
Pag. 3
English

Publicidad

loading