Using Your Lcd Screen; Cleaning And Maintenance - Spa Dynamix VITALA Manual De Instrucciones

19

Using Your LCD Screen

Using Your LCD Screen
Your Spa Dynamix® VITALA® Massage Chair uses
an LCD screen remote for your chair's functions. The
20
mi n
Speed ：
main interface will show the massage position, speed,
Width ：
Intensity ：
air intensity, and massage width (narrow, mid-range, or
wide). It also notes:
• Your current massage function (kneading,
tapping, knocking, pressing, or zero gravity)
• Time left in massage mode
Zero
• Heating information
Set function by pressing Menu key
Navigating the Menu
Press the "Menu" button to view the interface. Use the navigation keys to select
from the following options:
• Auto: Recovery, Pain Relief, Stretch, Health Care, Full Body, and Rocking.
• Manual: This allows you to use the manual mode in which you can set your
desired intensity, speed, position, and width adjustment. Use the arrow keys to
navigate to your selections, and the "OK" button to confirm them.
• Air: Navigate to the air selection using the arrow keys and press "OK" to
confirm. Use this function to control the air pressure intensity and positioning.
• Roller: Activate the foot roller by navigating to this menu option using the
arrow keys and pressing "OK" to confirm.
• Waist heating: This turns the heat function within the chair on and off.
Navigate to this option using the arrow keys, and press "OK" to turn the
function on or off.
• Time: The default time for massage is 20 minutes, but you can choose a 10-,
20-, or 30- minute massage using this menu selection.
• Language: Choose your desired language. You have the choice of English,
Chinese or Korean.
• Stop: Pressing this button will stop your current massage and return the chair
to its default position.

Cleaning and Maintenance

Cleaning and Maintenance
Cleaning Your Massage Chair
Your massage chair contains synthetic leather and cloth components. Routine
cleaning with a dry microfiber cloth will help maintain the material. Follow these
general cleaning instructions:
Synthetic Leather
Clean with a 3% to 5% neutral detergent solution. Remove all excess
moisture with a dry cloth. Let air dry–never use a hair dryer or other air-
blower.
Cloth
Use the same gentle solution and a brush or cloth to clean. Never use
harsh cleaning agents such as alcohol, gas, or diluent. Allow to dry
completely before using your chair.
Plastic
Use a weak, neutral solution to clean all plastic components. Always
wring out your cleaning cloth to remove excess water before applying.
Allow to dry completely.
Cleaning Your Remote Control
Use an electronics cleaning cloth to remove dust. Do not use alcohol, diluent, or
propellant to clean.
NOTE: Always unplug your chair before cleaning to reduce risk of electric shock.
Never submerge your chair in water or saturate with water or harsh cleaning
solution.
20