Settings And Configuring Mobilelite Wireless - Kingston MobileLite Manual Del Usuario

Settings and Configuring MobileLite Wireless

Using the MobileLite Wireless App, you can customise the wireless network settings for MobileLite Wireless. If
you did not make any changes during the initial setup, the default settings are: Device Name: MobileLiteWireless,
Visibility Status: ON, Wireless Channel: 11, and Security: Off.
To access MobileLite Wireless's Network Settings, please follow these steps:
1. From the 'Homescreen', select 'Menu'
2. Select 'Settings'
Name – commonly referred to as an SSID, or Service Set
IDentifier, this field allows you to specify a device name
(between 1 and 32 characters) that will broadcast
of available wireless networks
touch device. The default name is MobileLite Wireless as
seen in Figure 18.
Battery Life - indicates amount of charge left in battery
Firmware – MLW device firmware
Visibility – this gives you the option to hide or unhide the
SSID specified in the 'Name' field. By default, the visibility
status is turned 'ON'. If you wish to turn this feature 'OFF',
the device name will NOT be broadcast
available wireless networks on your iPad, iPhone or iPod
touch device. However, you can still join the Wi-Fi network
by entering the device name manually using the menu
option, 'Other...'.
Wireless Channel – this setting allows you to select a
specific frequency channel used to communicate with other
devices on your wireless network. The default setting is
Channel 11 (2.462 GHz.)
Security (WPA2) – this option helps prevent unauthorised access to your MobileLite Wireless device by
prompting users for a password. Simply enter a password in the 'Password' field, confirm it by re-typing it in
the 'Confirm Password' field and tap the 'Done' button to save the MobileLite Wireless settings.
1
I
f the visibility status has been turned off, you can still join the MobileLite Wireless network by entering the SSID manually on your iPad,
iPhone or iPod touch, as long as you know the 'Device Name' (Step A). Please note that a password will be required if the security option is
enabled.
Document No. 480-15FUM-001.A00
.
.
on your iPad, iPhone or iPod
Kingston MobileLite Wireless
in the list
1
in the list of
Figure 18 – MobileLite wireless network
settings
Page 18 of 20