Caring For Your Hand Mixer - Sunbeam 2470 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

while adding ingredients. Be sure to position beaters over
mixing bowl so any drippings will fall back into mixing bowl.
When mixing is complete, set speed control to "1," raise beaters
slowly from batter to clean off clinging food. Be sure to turn unit
to "O" before raising beaters completely out of mixing bowl.
Ejecting Beaters
Be sure speed control is at the "OFF" or "O" position and cord is
removed from electrical outlet. Scrape off any excess batter with a
rubber spatula. Grasp the stems of the beaters with your hand and
press the beater eject button. Beaters will release into your hand.
C
Y
H
M
ARING FOR
OUR
AND
IXER
Cleaning
Wash the beaters before and after every use. Beaters may be
washed in a dishwasher. Be sure to dry thoroughly after washing.
After removing cord from electrical outlet, clean mixer head with
a damp cloth and wipe dry. DO NOT IMMERSE MIXER IN WATER.
This may cause electric shock, injury, or damage to the product.
Avoid the use of abrasive cleaners that will mar the finish of
your mixer. The motor of your mixer has been carefully lubricated
at the factory and does not require any additional lubricant.
Storage
Coil the electrical cord of the Hand Mixer with a plastic twist fastener.
Store the Hand Mixer on its heel rest in a clean, dry location such
as a cabinet or shelf. Store beaters in a drawer.
Maintenance
Other than the recommended cleaning, no further user maintenance
should be necessary. If for any reason your Hand Mixer should
require repairs, do not try to fix it yourself. Send it to the nearest
Authorized Sunbeam Appliance Service Center.
7 7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido