Health And Safety / Technical Data - Rohr MIG-135A Operación Manual

MIG135A / MIG150R
Health and Safety
Environment
1. The machine can perform in environments where conditions are dry with a maximum humidity level of
90% and an ambient temperature between -10 to +40 degrees centigrade.
2. Avoid welding in direct sunshine or a wet/damp environment. If the machine comes into contact with
water, do not use the machine until it has been fully inspected by a qualified professional.
3. Do not use the machine in an environment where the air is polluted with conductive dust.
Technical Data
Power Input
Frequency(HZ)
Rated Input Current (A)
Output Current MIG (A)
Output Voltage
Duty Cycle (%)
Power Factor
Efficiency (%)
Wire Spool
Wire Speed(M/Min)
Post Puff (S)
Wire Wheel Diameter (mm)
Wire Diameter (mm)
Housing Shielding Grade
Insulation Grade
Suitable Wire Thickness
8
MIG-135A
Single Phase AC230V±15%
50/60
23
40-135
16.5-20.5
60
0.93
85
Compact
2.5-13
1
150
0.6-0.8
IP21
H
0.8 and above
© ROHR
English
MIG-150R
Single Phase AC230V±15%
50/60
25
60-150
16.9-21.5
60
0.93
85
Compact
2.5-13
1
150
0.6-0.8
IP21
H
0.8 and above