Steren COM-817 Manual Del Usuario página 23

Disable Wireless - The wireless of this AP can be enabled or
disabled to allow wireless stations access. If disabled, wireless
stations will not be able to access the AP.
AP provides fi ve operational modes: Access Point, Client,
Repeater, Bridge (point to point), and Bridge (point to
Multi-point).
Access Point - Access Point mode allows wireless stations
including AP clients to access.
• SSID - Enter a value of up to 32 characters. The
same name (SSID) must be assigned to all wireless
devices in your network. The default SSID is Steren,
but it is recommended strongly that you change your
networks name (SSID) to a different value. This value
is case-sensitive. For example, STEREN is NOT the
same as steren.
• Enable SSID Broadcast - If you select the Enable
SSID Broadcast checkbox, the Wireless Access Point
SSID will broadcast its name (SSID) on the air.
Client - This mode allows one or more remote LANs connect
with a central LAN, and thus creating an extended virtual LAN.
In this way, any station of the Remote LAN can successfully
communicate with any station of the central LAN, as if all of
them belong to the same physical LAN. Wireless Stations can't
associate with AP Clients.
ENGLISH-23