Instant Recording; Watching Recorded Programmes; Record Settings; Media Browser Menu - Teleco TFV20D Manual De Instrucciones

Instant Recording

Press the (RECORD) button to start instant
recording of a programme while you're watching it.
The recording will be done based on the EPG. You
can press the (RECORD) button on the remote
control again to record the next programme on the
EPG (Electronic Programme Guide). In this case, the
programmes scheduled for recording will be displayed
on the screen. Press the
instant recording.
Note: In instant recording mode, you cannot change channels or
watch a source other than that being recorded. When recording
a programme during a time shifting, a warning message will
appear on the screen if your USB device's speed is not sufficient.

Watching recorded programmes

Select the Recordings in library option under the
media browser menu. Select one of the recordings
in the list. Press the OK button to display the play
options. Select an option and press the OK
Note: The display of the main menu and the submenus are
not available when playing recordings.
Press the (STOP) button to stop playing and return
to the recordings in the Library.
Slow forward
If you press the (PAUSE) button while watching a
recorded programme, the slow forward option will be
available. You can use the
forward. To modify the slow forward speed, press the
button.

Record settings

Select Record settings option in the Settings menu
to configure recording parameters.
Format the disc : You can use the disk formatting
option to format the connected USB disc. Your PIN
code will then be asked.
The default PIN code can change depending on
the country selected.
If a PIN code is required to display a menu option,
enter one of the following codes: 4725, 0000 or 1234.
IMPORTANT : Note that all the data contained in
the USB device will be lost and the device will be
formatted using FAT32. Also, if your USB device does
not function properly, you can try to format it. In most
cases, formatting the USB device solves the problem,
however, ALL the data contained in the USB disc are
lost in the same situation.
Note : If the message "USB too slow" appears on the screen
at the start of a recording, try starting the recording again.
If the same error message appears, it is possible that your
USB disk does not have the required speed. Try to connect
another USB disc.
(STOP) button to cancel
button for the slow
English - 54 -

Media browser menu

You can view picture, music and video files stored in a
USB device by connecting this device to your TV set.
Connect a USB stick to one of the USB ports located
on the side of the TV set. For video, photo and music
files, you can access a settings sub menu (image,
sound and others) by pressing the MENU button.
This function does not work with recordings done
on the TV set. By pressing the MENU button again
the display disappears. You can set the preferences
of your media browser through your settings menu.
Functioning of the Random / Repeat mode
Launch playback with
enable
Launch playback with
enable
Launch playback with OK/
enable

Quick Menu

The quick parameters menu ensures quick access
to certain options. This menu includes Power
economy mode, Picture mode, equalizer settings,
favorites and Programmed shutdown options. Press
the Q.MENU button of the remote control to display
the quick menu. See subsequent chapters for details
of listed functions.
and The TV set reads the next file
and closes the list.
and The same folder will be read
repeatedly.
and
The folders concerned will be
read randomly.