Skotti-grill 414784989 Manual De Instrucciones página 11

This is how you set up your Skotti This is how you set up your Skotti
7
6
Tip
Check for video instructions at www.skotti-grill.eu
`
9
6� Hold the bottom panel (8) close to the foot panel
(5) to support the hooks on the side and slide both
tabs at the front of the bottom panel into the cor-
responding slits of the foot panel.
7� Take the burner pipe (3) at the squeezed end and
hook it into the horizontal 3 cm-long slot above
6
the honeycomb-shaped hole at a steep angle and
with the tab facing upward.
8� Carefully rest the burner pipe (3) on the bottom
plate (8).
9� Place the baffle plate (2) onto the burner pipe (3).
It should look like a rooftop over the pipe.
10� Slide the tabs of the perforated side into the two
slanted slits of the foot panel (5).
11� Let the baffle plate (2) rest a little on the bottom
panel (8)�
12� Take the head panel (7) and slide the round end of
the burner pipe (3) through the round hole of the
head panel (7). The curvature of the head panel
should be on the inside of the grill.
13� Lift the head panel (7) and slot the two tabs on
the baffle plate (2) onto the corresponding slanted
slits of the head panel.
14� Drop the head panel (7) into place, with the slits
fitting smoothly onto the side panels (6).
The end result is a stable and symmetrical grill
9
that looks like a basket.