Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
This device is a 2-in-1 creeper seat and step stool. When used as a creeper seat, it will support and move rated
capacity loads consisting of a single person weighing no more than 300 lbs. In the step stool position, this device will
support a rated capacity load. This device is not intended, designed or engineered to be used for any other purpose.
Rated Capacity: One person (includes any tools, and equipment) weighing 300lbs. or less.
SPECIFICATIONS
!
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
M6 X 16 Phillips
Head Screws
Crossbar
Seat Cushion
Figure 1 - Attaching U-brackets
Model
Rated Capacity
C-2800
300 lbs.
Seat braceket and U-bracket
Seat Size
Step Size
14" x 7-7/8"
14" x 9"
PREPARATION/ASSEMBLY
Before assembling your Creeper, make sure all parts
are present. If any part is missing or damaged, do not
attempt to assemble or use the product. Contact Pro-Lift
customer service for replacement parts.
Package Contents: 1 Seat Pad Section, 1 Caster
Frame Section, 1 Tool Tray, 2 Side Frame Sections, 2
Seat Support Brackets & U-brackets, 5 Casters, as-
sorted hardware.
1. With the Seat Cushion facing down, align the holes
of the Crossbars with the seat. Then align the holes
of the Seat Supports Bars and attach with four
M6 x 16 Phillips Head Screws.as shown in Fig. 1.
2
Publicidad
Tabla de contenido
