Operating the vacuum
You are recommended to completely unwind the power cable
before you switch on the appliance. Stop pulling once the yellow line
is visible; the red line indicates the end of the usable cable (Figure 3).
NOTE: Never pull the cable out beyond the red line.
Starting the vacuum
Operating modes
Using the cleaning wand
Figure 1
Connect the cleaning wand to the flexible hose and attach the carpet
and hard floor brush (Figure 1), the crevice head or the small brush
head (Figure 2) or one of the optional brushes (Figure 3).
Press the ON/OFF button on
the top of the appliance to start
vacuuming.
Figure 2
9
Figure 3
EN