Sinbo SS 4042 Manual De Instrucciones página 10

head will tack out (fig. 9&10).
2. Place a new Rollers Grinding Head into the unit until you hear a "click' sound. Be sure to
insert the new head into the unit ,it has been firmly installed.
Note: Do not turn your unit On if the Rollers Grinding head is not attached.
How to Cleaning
Note: Clean the appliance after each use to ensure better performance
This Callous Remover is water resistant It can be rinsed under water for cleaning:
1. Remove the protective cover from the head.
2. Clean the Callous Remover with the cleaning brush. Do not switch the appliance on while
brushing(fig.11).
3. Rinse the unit under the tap. sometime you can operate the unit,keep the head runing for
5~10 seconds,that quick and high efficiency(fig.12).
4. Turn the unit off.
5. Wipe the body of the unit with a clean dry cloth.
6. Replace the protective cover.
Storage
When the appliance is not in use put it on a dry place that children can not touch.
Do not place the appliance in an area with excessive heat or moisture.
- 9 -