Steren RM-KID Manual De Instrucciones página 37

Programming favorite channel
1. Press the device button you want to program:
"TV" or "CBL".
0
2. Press the button to be programmed (1 to 9) for
TV CBL
5 seconds until the LED fl ashes twice and then
remains steady.
3. Enter the channel you want to program.
1
By default, the remote saves the channels in 4
digits, so you must add zeros at the end of the
channel if it is not 4 digits. For example, if you want
1
to program the channel 455, you must enter it as
CH
V
4550, adding a zero at the end.
4. After entering the channel number, press the
device button you chose (TV or CBL) to confi rm
3
2
and fi nish programming.
5. Repeat these steps to program other channels
in the other buttons.
14