Description (Fig. A) - Princess Style Pro Manual Del Usuario

Description (fig. A)

Your 509100 Princess hairdryer has been
designed for blow-drying your hair.
1. On/off switch
2. Temperature switch
3. Blowing force switch
4. Digital display
5. Cool air function button
6. Turbo function button
7. Handgrip
8. Airflow outlet
9. Air intake filter
10. Nozzle
11. Diffuser
Assembly
Warning! Before assembly, always switch off
the appliance and remove the mains plug from
the wall socket.
Mounting the accessories (fig. B)
The nozzle (10) focuses the airflow onto a
small area and smoothes out the hair for a
sleeker style. The diffuser (11) makes your
hair appear thicker and provides soft waves
for a more tousled look.
• Press the accessory onto the airflow outlet
(8) until it clicks into place.
Use
Warning!
• Do not use the appliance near bathtubs,
showers, basins or other vessels
containing water.
• If you use the appliance in a bathroom,
remove the mains plug from the wall
socket after use. The presence of water
can cause a risk of personal injury or
damage to the appliance even when the
appliance is switched off.
• For additional protection, install a residual
current device (RCD) with a rated residual
operating current that does not exceed
30 mA in the electrical circuit of the
bathroom. Contact your installer for advice.
Hints for optimum use
• If possible, allow your hair to partially
dry naturally. If it is necessary to use the
appliance, remove as much moisture from
your hair as possible.
• Use a wide-toothed comb to avoid damage
to the hair.
• Move the hot airflow in the direction of the
hair to avoid disturbing the cuticle.
• Do not use a brush until the hair has dried
sufficiently to avoid damage to the hair.
• Do not rub your hair with a towel to prevent
your hair from catching on the fibres,
stretching and snapping.
• First treat the lower sections of your hair
and slowly move the appliance to the
higher sections.
• If you use the appliance with the head
upside down, your hair will get more lift and
body.
• If styling is required or if you have curly
hair, make sure that your hair is a little
damp.
• If you have curly hair, use the diffuser to
spread the airflow and to make sure that
the curls are not straightened out.
• If you have fine hair, you must use a lower
temperature setting. If you have rough hair,
you can use a higher temperature setting.
• If you have a cowlick, wrap your hair firmly
around a brush in the opposite direction
and then blow-dry to smooth out the
cowlick.
Switching on and off (fig. C)
• To switch on the appliance, press the
on/off switch (1).
• To switch off the appliance, press the on/off
switch (1) for two seconds.
Setting the blowing force
(fig. A & D)
The actual setting can be read from the digital
display (4).
• Press the '+' button on the blowing force
switch (3) to increase the blowing force.
• Press the '-' button on the blowing force
switch (3) to decrease the blowing force.
8