Grease Filters; Light Replacement - Beko CTB 6250 W Manual Del Usuario

Maintenance
5

5.1 Grease Filters

5.1.1Cleaning Metal Self-
Supporting Grease Filters
• The filters must be cleaned every 2 months, or
more frequently in case of particularly heavy
use of the hood. Filters can be washed in a
dishwasher.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having dis-
connected the relative fastening elements.
• Wash the filters, taking care not to bend them.
Let them get dry before refitting them. (The col-
our of the filter surface may change throughout
the time but this has no influence to the filter
efficiency).
• When refitting the filters, make sure that the
handle is visible on the outside.
• Close the sliding suction panel.
5.2 Charcoal filter (Recycling
version)
5.2.1 Replacing Charcoal Filters
Warning: Turn the lights off
A
and wait until the lamps cool
down before you change
the odour filter.
• These filters are not washable and cannot be
regenerated, and must be replaced approxi-
mately every four months or more frequently
by particularly heavy use.
12 / EN
• Pull out the sliding suction panel.
• Remove the grease filters.
• Remove the saturated carbon filter by releasing
the fixing hooks
• Fit the new filter by hooking it into its seating.
• Replace the grease filters.
• Close the sliding suction panel.
5.3 Lighting

5.3.1 Light Replacement

28W light
• Remove the metal grease filters.
• Unscrew the bulbs and replace them with new
ones having the same characteristics.
• Replace the metal grease filters.
Hood / User Manual