Aqua Medic multi reactor L Manual De Instrucciones página 6

1. Technical Information
Measurements (l x w x h)
Volume
Power consumption
Pump rating
Aquarium sizes
2. Setup and Operation
Pict. 1: Opening and closing the lid.
If the sponge (3) is dirty and needs to be cleaned, shut-off the pump, open the filter body and
clean the sponge with water.
To remove the lid, the screws have to be released and then the lid has to be rotated the way that it
can be removed. When closing the lid, make sure that the sealing ring is inserted correctly. There
should be no filter media or other impurities between the flange and lid.
The multi reactor L is designed to operate directly inside the filter sump. With the supplied tube
and regulating tap, the flow rate can be adjusted and the water, if required, can be led in another
chamber. It's also possible to use PVC brackets and PVC-pipe D 20 as outlet (not included) instead
of the tube.
6
approx. 130 x 130 x 370 mm
approx. 1,000 ml
220 - 240 V / 50 Hz
7.6 Watt
approx. 650 l/h
up to 800 l