Publicidad
Idiomas disponibles
Idiomas disponibles
STE P-BY-STEP ASSEMB LY
Step 14
Fasten the Right Door
and Left Door
to the assembly with Flat-Head Screws
in the locations shown below.
K
J
7
Leave the screws loose until the doors are parrallel to the Top and Bottom Panels of the case then tighten evenly. Note:
Do not overtighten. It may also be necessary to adjust the bind between the divider and the door using the Bind
Adjustment Screw and/or the gap between the two doors using the Gap Adjustment Screw as shown below.
7
K
Bind
Adjustment
Screw
J
Gap Adjustment
Screw
Flat-Head Screw
7
x16
18/20
Publicidad
