PERSONALIZATION MENU AND CLIMATE CONTROL STATUS
ATTENTION: The Rearview Camera Input is used to display the Personalization Menu and the Climate Control Status. If the aftermarket radio does not have a screen with a Rearview Camera Input, then
there will be no visualization of the Climate Controls Status or Personalization Menu. An externally mounted screen could be substituted in this situation. If there is no visual, please go back and check the
wiring and settings in the radio.
Personalization Menu
Note:
The steering wheel controls for the personalization menu will override the controls for the radio,
and the Push-to-Talk (OnStar) button on the steering wheel control will be disabled.
Note:
If installing an ASWC-1 (sold separately), the PTT (OnStar) button on the steering wheel cannot be
programmed for Dual Assignment.
• Press and hold the Push-to-Talk (PTT) button on the steering wheel for 3-5 seconds to enter the
personalization screen. The climate control screen will appear first; press Push-to-Talk (PTT) one more time
to enter the personalization menu.
Note:
The menu has a 5-7 timeout feature. With no interaction, the menu will revert back to the radio,
and the procedure will need to be repeated.
• To navigate through the menu, you will continue to use the steering wheel control buttons. Touch points
are not available in this menu, as well as with the comfort controls.
• The controls are as follows:
Volume Up = Up
Volume Down = Down
Source (SRC) = Enter
Mute/Hang up = Back or Return
Seek Up and Seek Down = Not used
Climate Control Status
• The use of the factory controls will interrupt the visual screen on the radio,
and show the status of the changes being made instead.
Note:
For some aftermarket radios, there is a delay switching to the
"Rearview Camera Input".
Note:
This menu has a timeout feature; after 5 seconds of no climate control use, the visual will return
back to the radio.
7
REV. 7/20/2020 INST95-3318B