Troubleshooting - B.A. International BASE050 Manual Del Usuario

Business users should contact their supplier and check the terms and conditions
of the purchase contract.
◆Type of protection against electric shock:
This product should not be mixed with other commercial wastes for disposal.
◆Degree of protection against electric shock:
Class I equipment
Type BF Applied Part
WARRANTY
BA International warrants products for manufacturer's fault such as material or work-
manship for 1 year from the date of invoice. The warranty does not cover the product
fault caused by user's misuse, wrong installation, inappropriate maintenance and re-
pair, and normal wear of consumable parts such as bearings, spindle case ass'y, ar-
mature etc. In order to check the warranty, it's required to provide used condition and
environment information with product serial number and stamped invoice. The perfor-
mance of warranty is by manufacturer's product analysis and discretion by repair or
replace the product.
Exception of warranty
user's misuse or improper use and treatment using with wrong input Voltage (AC Vol-
tage) dropping down during setting, moving, using using consumable parts or acces-
sories not recommended by manufacturer malfunction after repairing at the places
not recommended by manufacture replacing normal wear of consumable parts (ball
bearings, gear assy, collet chuck,armature etc)
1. If any problem occurs in handpiece, stop using it and contact your dealer.
2. Do not turn on the power of control box while the collet chuck of handpiece opens.
(Short circuit of the motor may be caused.)
3. Make sure that the switch is off before putting the power plug in the socket in order
to avoid an unexpected injury due to sudden start.
4. A circuit breaker is provided to protect the motor. It is actuated when there is an
overload which the motor can not stand. Work within a range of load which it is not
actuated.
5. Do not open the chuck while operating.
6. Keep the handpiece with bur and mandrel.
7. Do not put the handpiece down before it stops completely.
8. Be sure to pull out the power cord before moving the control box.
9. Use the specified voltage.
10. Use accessories suitable for this product.
11. For recommended speed in various applications, follow the manufacture's instruc-
tions.
12. Wear proper protective clothes and equipment including a dust mask and safety
goggles to protect eyes Use proper ventilator and inhaler.
13. Keep the workplace clean. Debris may cause an accident
Cautions
when the motor is working at high RPM, the product can be damaged
Temperature ( )
Operating
Relative humidity (%)
condition
Atmospheric Pressure (hPa)
Transport Temperature ( )
and
Relative humidity (%)
storage
Atmospheric Pressure (hPa)
condition
Suggestion for maintenance
- Keep the place around the motor clean
- Remove dust on motor wiping with isopropyl alcohol andneeds to be
dried properly.
The battery used in the control unit is a Nickel-Hydrogen type, and recyclable.
- The battery cautions are common for general batteries.
- In case of contact the liquid to clothing or body skin or eyes, wash immediately.
- In case of shortening the operating time or the speed becomes slower, it may
means the replacement of the battery.
- Follow the government or local law for battery disposal.
The battery used in the control unit is a Nickel-Hydrogen type, and is a wearable
component. The battery life is limited. Battery capacity decreases little by little as
you use it more and more, and as time passes. Its life varies depending on storage,
operating conditions, and environment. When not in use for a porlonged period, the
battery might deteriorate. When the battery operating time seems to have been con-
siderably shortened, a probable cause is that the battery has reached the end of its
life. For replace it, send to the dealer.
Trouble shooting
(1) Motor
Troubles
Motor
fails to
run.
(2) Battery
Troubles
Battery
rechar-
ging fail.
10~40
30~75
700~1060
-20~60
In case any malfunction please contact your dealer or your approved
BA international repair centre.
10~90
500~1060
TroubleDetail Cause
Control unit fully (1) Loose connection
charged. but motor motor plug with jack
fails to run. in control unit.
(2) Defect in motorcord.
(3) Trouble in motor.
Motor stops in 2-3 Battery has not been
seconds. charged.
Motor runs with Worn battery.
insufficient power and
stop in a few minutes.
The motor stops Overload activates
during use. Heat
Motor gets heat and Need to change
make noise Bearings.
Bur is not holding or Worn Collet chuck.
cant remove it
TroubleDetail Cause
Power cord is not con-
nected to the power
supply (AC power
adaptor)
Speed Control Knob is
at OFF.
Battery seemed to
have been fully char- DC plug is not con-
ged, but when used, nected or loosely con-
nected to the control
motor fails to run, or
unit.
motor runs but stops in
a few minutes.
Blown fuse in AC
power adaptor.
Speed Control Knob
malfunctions.
BASE050 AC power
adaptor is not used.
The blinking red light. Battery has not been
charged.
Rev.2018/02
Remedy
Correctly plug the
Motor cord.
Replace motor cord.
Replace Carbon brushes.
Check motor and repair
if the motor is trobuled.
Charge battery.
Replace battery.
• Re-use the product
after cooling for over
3 minutes.
• If overload activates
frequently, product life
will be shortened.
Change bearings
Change Collet chuck
Remedy
Check at power supply.
Set Speed Control
Knob at ON.
Check if DC plug is
correctly connected to
the control unit.
Check and replace AC
power adaptor.
Replace Speed Control
Knob.
Use only BASE050
AC power adaptor.
Charge battery.