9. ALARMS SHOWN ON DISPLAY
ALARM
10. TROUBLESHOOTING
Below is a list of possible malfunctions.
If the problem cannot be solved using the proposed solution, contact the Service Centre.
PROBLEM
The appliance is operating in dehumid-
ifying mode, but the humidity does not
decrease
CAUSE
Tank (A2) missing or incorrectly
positioned
Tank full
Room temperature too low (see op-
erating limits in chap. "8. Technical
Specifications")
Faulty probe
CAUSE
The filter is clogged
Either the temperature or humidity in the
room is too low
The set relative humidity level is too high Set a lower humidity value (see para. "5.1
SOLUTION
Place the tank back in its correct position (see para-
graph "4.1 Draining into the tank")
Empty the tank (see paragraph "4.1 Draining into the
tank")
Increase the ambient temperature if possible
Contact the Service Centre
SOLUTION
Clean the dust filter (para. "7.2 Cleaning
the dust filter")
In certain conditions the appliance will
not dehumidify: check the operating lim-
its of the appliance (see chapter "8. Tech-
nical Specifications"). In certain cases, it
is recommended to heat the room need-
ing to be dehumidified.
Dehumidifying mode").
10