Intended Use; Items Supplied; Technical Data - Hilti TE 30 Manual Del Usuario

3.2 Intended use

The product described is an electrically powered combihammer.
designed for drilling in concrete, masonry, wood and metal.
The version with AVR can also be used for light to medium-duty chiseling
on masonry and for finishing work on concrete.
▶ The tool may be operated only when connected to a power source
providing a voltage and frequency in compliance with the information
given on the type identification plate.
3.3 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.4 AVR option
The product may be optionally equipped with an Active Vibration Reduction
(AVR) system, which reduces vibration noticeably.
3.5 Motor protection system
The tool is equipped with a motor protection system. The system monitors
current input and motor temperature and thus prevents the tool from
overheating.
If the motor is overloaded through application of excessive working pressure,
the power tool's performance drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the
pressure applied to the tool and then allow it to run under no load for approx.
30 seconds.

3.6 Items supplied

Rotary hammer, side handle, depth gauge, operating instructions.
For safe, reliable operation, use only genuine Hilti spare parts and
accessories. Spare parts, accessories and consumables approved by
Hilti for use with this product can be found at your Hilti Center or at
www.hilti.com.
4

Technical data

For rated voltage, rated current, frequency and/or input power, refer to
the country-specific type identification plate.
If the device is powered by a generator or transformer, the generator or
transformer's power output must be at least twice the rated input power
shown on the rating plate of the device. The operating voltage of the
*2143374*
2143374
It is
English 7