Run Mode; Dmx Address - NEO Fresneled 3100 MAX Manual De Usuario

DIMMER (STAT)
•
DIM: To adjust level of intensity
•
ZOOM: To adjust the zoom position.
NOTES:
•
When using this function, if the MCON menu is set
as MAST, then the fixture will transfer the DIM val-
ues to other fixtures.
•
When DMX data is received at the fixture, it will
automatically return to main menu after 2 minutes
of no key operation.

RUN MODE

•
RUN: This menu allows the user to select the op-
erating mode of the fixture. Select DMX for nor-
mal DMX operation or SLAV for slave operation.

DMX ADDRESS

•
ADDR: This menu allows the user to select the
start address of the fixture. Use <UP> or <DOWN>
keys to select required start address.
MOTOR RESET (MOTR)
•
Press ENTER to enter <MOTR>
•
Press UP/DOWN and select <YES> or <NO>
•
When you select <YES> and press ENTER, the
motor will be reset to origin.
•
When you select <NO>, and press ENTER, no control.
P. 7
FRESNELED MAX
ENGLISH VERSION