Everbilt SWJP125 Guía De Uso Y De Mantenimiento página 5

Assembly(continued)
8.Prime the pipe and pump, make sure that the connections and check valve do not leak. The pipes should hold
water. If they leak, remove the pipes and find the leak. Remake the leaking joint with teflon tape or retighten the
clamp. Repeat the installation and the fill-check until the pipes do not leak.
9.See your pump owner's manual for operation instructions.
For warranty registration please go to www.gppumpsus.com
5
Please contact 1-844-241-5521 for further assistance.
HOMEDEPOT.COM