Evolution EVOSYSTEM Manual De Instrucciones página 144

Fig. 6
Fig. 7
144
®
• The surface is firm and stable.
• No combustible materials are close by.
• The area is well ventilated, and that there is no danger
from the expelled exhaust gases.
Note: The Evo-System Engine is fitted with a low oil level
shut down feature which protects the engine from damage
due to lack of lubrication. This feature could be activated if
the machine is sited on a slope of greater than 10
2. Preparing the Evolution Evo-System Engine
Note: Refer to the Instruction Manual for the
Evo-System Engine.
• Check the Fuel Level.
• Check the Oil Level.
• Visually check all fuel lines and electrical connections.
3. Starting the Engine
Note: Refer to the Instruction Manual for the
Evo-System Engine
• Check that the trigger switch on the jet lance is in the
locked position. (Fig. 6)
• Check the integrity of all hose connections.
• Turn on the water supply to the pump and allow water to
run into the pump.
• Start the engine.
• Allow the engine to reach its normal operational
temperature.
4. The Lance Nozzle
Note: The Jet Lance has an adjustable outlet nozzle. (Fig. 7)
• Pull the nozzle downwards to access 'low pressure mode'.
• Pull the nozzle upwards to access 'high pressure mode'.
In either setting, rotating the nozzle to the right, (as seen
from the handle) will result in the water jet emitted from the
nozzle being 'fan' shaped.
In either setting, rotating the nozzle to the left, (as seen
from the handle) will result in the water jet emitted from the
nozzle being a thin stream.
www.evolutionbuild.com
.
0