Behringer CT100 Manual De Uso página 4

Ocultar thumbs Ver también para CT100:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
4
CABLE TESTER CT100
5. Phantom Power Detect
In TEST TONE MODE, pins 2 and 3 are monitored for external DC
voltage (commonly supplied for condenser microphones). The
PHANTOM LEDs will light if DC voltage above approx. 9 V is detected.
6. Wiring
Balanced ¼" TRS connector
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
1/4", TT, 1/8" TRS connectors (mono or TS connectors also work)
Unused
Pin 3
Pin 1
(ground)
MIDI connector (2 pins unused)
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
Unused
Pin 2

Publicidad

Tabla de contenido
loading

Tabla de contenido