Habitat Pegase Manual De Instrucciones página 2

EN
This manual contains important information that should be kept for
future reference.
For domestic use only.
Dimensions
Dimensions of bed unfolded: 210 x 80 x 215 cm.
Dimensions of bed: 194 x 140 cm.
Materials
Cover: 100% polyester.
Top layer of seats: acrylic wadding 280 g.
Top layer of backrests and armrests: acrylic wadding 250 g.
Seat padding: polyurethane foam 24 kg/m3.
Back padding: polyurethane foam 35 kg/m3.
Armrest padding: polyurethane foam 35 kg/m3 and 21 kg/m3.
Wooden base of armrests: poplar plywood veneered with varnished
oak.
Mattress ticking: 100% polyester.
Core of the mattress: polyurethane foam 30 kg / m3 (11 cm) and 2
upper and lower layers of 200 g polyester fibers.
Seat structure, backrest, armrests: pine plywood and chipboard.
Mechanism: electro-welded metal.
Mattress thickness:
Assembly instructions
Before beginning assembly, identify all components using the manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you want
to install.
Assemble on a clean, flat surface.
In step 6 of assembling the wooden bar on the front of the sofa,
it is important to position it correctly. When the bar is properly
installed, it takes the shape of the bottom of the sofa. Otherwise, a
gap is formed between the bar and the bottom of the sofa.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
Danger of pinching/squeezing when folding/unfolding.
During the first use of the convertible, remove the mattress protective
plastic to prevent the compressed air hinders the proper functioning
of the mechanism when folding the mattress. During closing of the
bed properly position the mattress whose movement could damage
the mechanism.
Do not leave pillows or duvet in bed couch position.
It is recommended to lubricate all mechanical parts to avoid the crea-
king of springs, levers or joints etc ...
Maintenance
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry dabbing
to absorb the liquid. Do not rub, it may damage the fabric. Variations
in color between the surfaces cleaned and uncleaned might appear.
Avoid direct and prolonged exposure of the product to sunlight. The
colors may fade.
Do not place the product near a heat source (radiator, fireplace...) nor
a moisture source. The heat and humidity can damage the product.
Do not use abrasives.
If in doubt, contact a professional to carry out cleaning.
Pegase - 04/2021
Keep the label with lot number, it may be useful in case of
BC
complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat.eu or
write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
1