Kohler K-2607 Guía De Instalación Y Cuidado página 5

Pilot Hole
Lag Bolt
Screw
Pilot Hole
3. Secure the Cabinet
CAUTION: Risk of property damage. Use care when
moving the cabinet to avoid impacting, sliding, or
side-loading the legs.
NOTE: The K-2607 bridge cabinet is designed to be installed with
the K-2604 vanity and is not intended to be installed individually.
Read both product installation instructions before beginning. The
vanity should be installed before the bridge cabinet.
To properly secure the cabinet, 2x6 backing material must be
installed behind the finished wall. Refer to the K-2604 vanity
installation instructions for site preparation.
Use care to lift and place the cabinet in position against the
previously installed vanity and finished wall. Do not slide or
side-load the legs.
Verify the cabinet is level and flush against the vanity, and the
back rail is plumb against the wall. If necessary, turn the
leveler(s) to adjust the unit.
Using a 1/4" drill bit, drill two pilot holes through the back rail
and the finished wall. Verify the pilot holes are positioned to
ensure the lag bolts will engage the 2x6 backing material.
Using a 1/8" drill bit, drill two pilot holes through the side of the
cabinet and into the vanity.
Kohler Co. 5
Leveler
1207227-2-A