Adjusting Cutter Bar Angle - Stihl HL 75 Manual De Instrucciones

Change the fuel pick up body every
year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
HL 75, HL 75 K

Adjusting Cutter Bar Angle

(adjustable version only)
2
3
The angle of the cutter bar can be
adjusted to 8 positions between 0°
(straight) and 90° (right angle).
This choice of angles helps enhance the
versatility of the unit.
To adjust cutter blade angle
: Shut off the engine.
:
Pull back the sliding sleeve (1) and
use lever (2) to adjust joint by one or
several holes.
1
:
Release the sliding sleeve and
allow pin to engage the quadrant
(3).
Sliding sleeve butts against the
housing when the pin is properly
engaged (after making adjustment).
English / USA
17