Publicidad
B. Attach the UHF/VHF combo box to the antenna
bracket.
UHF element +
bracket, front
Antenna bracket, back
M4x25 screw
UHF/VHF combo box, back
M4x12 screws
Insert the 1 M4x25 screw into the slot on the back of
the bracket, as shown here.
Screw the M4x25 screw into place to secure the
bracket to the UHF element.
Find the F-connectors on the back
of the UHF/VHF combo box and
the front of the antenna bracket, as
shown here.
Insert the combo box's connector
into the antenna bracket's
connector.
IMPORTANT: Make sure to place
the coaxial cable lead from the
combo box between the UHF
element and bracket.
Insert 2 M4x12 screws into the
slots on the back of the bracket, as
shown here. Make sure the slots
are aligned with the holes on the
combo box.
Screw the M4x12 screws into place
to secure the combo box to the
antenna bracket.
Pieces Used:
UHF element
+ bracket
UHF/VHF
combo box
(2) M4x12
screws
3
Publicidad
