Caution: After use with shaving gel, please rinse the head and cutters under warm water to clean away any
excess gel and debris.
TRIMMING
CLEANING AND MAINTENANCE
Unplug the appliance.
When cleaning, use a soft cloth (or sponge) and neutral cleaner on the exterior surfaces of the appliance.
You can clean your shaver under water or dry cleaning it thoroughly.
It is recommended to clean your shaver after each use. It is recommended to thoroughly dry cleaning your
shaver once a month for a better maintenance.
CLEANING UNDER WATER
DRY CLEANING
1. Switch off your shaver and unplug the adapter cable. Retrieve the shaver head by pulling it from the top.
2. Press on the release button of the head and cutters set. Use the cleaning brush to clear the hairs from the
tank.
3. Use the tong cutters by embedding it on the two protruding notches of the plastics rings, then turn anti-
clockwise to unlock the cutter, plastic ring and the grid.
4. Retrieve the cutter, plastic ring and the grid from their location.
5. Use the cleaning brush to clean the cutter.
6. Use the cleaning brush to clean the grid.
7. At the end of your cleaning, replace the grid into its location, then the cutter and the plastic ring. Ensure each
element is well embedded into its location. Use the tong cutters by embedding it on the two protruding notches
of the plastics rings, then turn clockwise to lock the cutter, plastic ring and the grid.
8. Place the shaver head on top of the main body and push down to lock it.
Switch off your shaver and unplug the adapter cable.
Press on the release button of the head and cutters set.
Rinse under warm water for one minute.
Shake off carefully to retrieve the remaining water and let the shaver head dry.
Close the shaving head holder when dry.
• Push the trimmer button to release the detail trimmer.
• Hold the trimmer at a right angle to your skin.
• Place the trimmer at desired trim line for a quick, easy
and professional trim.
• Switch the shaver on by pressing the ON/OFF button.
• To retract the trimmer, push down until it locks into
position.
3
ENGLISH