Filling The Medication Chamber; Administrating The Medication - MEDIX AC2000 Manual Del Usuario

en

6.1 Filling the Medication Chamber

For Single Patient Use
1. Connect one end of the driveline to the outlet filter on your compressor nebuliser.
2. Connect the other end of the driveline to the bottom of the blue medication chamber.
3. Remove the medication chamber top from the cup and pour
medication into the chamber (max. 10ml.).
4. Screw the top back onto the medication chamber.
5. Connect either the face mask or mouthpiece to the medication
chamber top.
All accessories must comply with EN 13544-1
6.2 Administering the Medication
Switch the compressor unit on. Sitting in an upright relaxed position, place mouthpiece into the mouth (or face mask
over the nose and mouth) and start breathing slowly and deeply. Do not try to breathe quickly. If you have any problems
seek instruction from your doctor or physiotherapy department at your hospital.
Switch off the compressor nebuliser when the misting has stopped. Unplug the mains lead.
4