Side Panel Controls And Connectors; Switching Between Sleep, Standby And On - PURE One Flow Manual De Instrucciones

Side panel controls and connectors

Switching between Sleep, Standby and On

One Flow has three power modes, Standby, Sleep and On. In Standby, One Flow uses minimal power.
In Sleep mode, One Flow remains connected to the wireless network (once attached) and is ready to
stream audio using the Pure Connect app. See page 10 for more information.
To enter Sleep mode, press Standby.
To enter Standby mode, press and hold Standby.
Once in Sleep/Standby mode, press Standby to switch to On.
6
Standby
Press to switch One Flow between Sleep, Standby and On.
See below for more information.
Note: If One Flow is being powered by ChargePAK E1,
pressing Standby will switch One Flow off.
Mini USB socket
For software updates and Pure Mini USB
Ethernet adapter.
3.5mm stereo headphone socket
Aux in
You can use One Flow to listen to audio
stored on an iPod or other portable music
player. You will need a suitable 3.5mm to
3.5mm auxiliary lead (not supplied).