Fermax SMILE VDS BASIC Manual Del Usuario página 10

SMILE VDS
SMILE VDS
Notice:
- The wildcard button
exiting programming, this button stops blinking, indicating that the monitor is programmed.
- If you want to re-program the monitor the administrator code is 4444.
6. Exit Programming: When you press
Continue pressing
programming mode after 60 seconds of inactivity.
PROGRAMMING: USER Menu - Ringtones
1. To access the USER menu. Press "Menu" for 3 seconds.
a) ringtones, with the cursors (white line under the icon) and press
a) Ringtones
Within the menu, the monitor allows you to se-
lect an independent ringtone for the call from:
- a1) Main street panel
- a2) Secondary street panel.
- a3) Doorbell.
- a4) Audio Adjustments.
You can select that the ringtone rings three
times (continuous mode).
2. Within the ringtone (white line under the
icon), if you press
listen to the different ringtones, (when
a ringtone sounds in demo mode, the
monitor´s screen is turned off).
will continue blinking (red) until having exited programming. Upon
until you exit programming. The monitor will also automatically exit
CONFIGURATION menu
1
1
1
, you change and
you exit to the previous programming menu.
.Select Confi guration Menu:
Ringtones
a1
a2
a3
a4
1. Select the origin of the call with the cursors
a b
, panel 1, panel 2 or door bell(white
line under the icon). Press
the ringtone.
d
c
3. If you want the ringtone to ring three times
(continuous mode), press
tinuous mode (white line under the icon).
.
1
1
1
, you access
2
1
1
, to select con-