DeLOCK 47171 Manual Del Usuario página 9

4. Fasten the hard drive with provided screws to the slide-in frame.
5. Slide the frame back in to the enclosure and close the enclosure with the
screws.
Installation of the 3.5" enclosure into the 3.5" bay:
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the panel from the available 3.5" bay.
4. Insert the mobile rack into the bay and screw it to the housing.
5. Finally connect the cables of the mobile rack with the respective connectors
to your computer.
6. Reattach the housing, and connect the power cord to the AC adapter.
Installation of the 3.5" enclosure into the 5.25" bay:
1. Turn off your PC, and unplug the power cord.
2. Open the housing.
3. Remove the panel from the available 5.25" bay.
4. Insert the mobile rack into the bay and screw it to the housing.
5. After that put the device into the bay and screw it to the bay.
6. Connect the cables of the mobile rack to the respective connectors of your
computer.
7. Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
Windows 2000/XP/ Server 2003
For use with the 3.5" mobile rack on the PC:
1. Switch on your computer.
2. Put the 2.5" enclosure into the mobile rack.
3. The HDD will be found and the device can be used immediately.
4. By pushing the eject button you can remove the enclosure from the mobile
rack and use also externally.
For external use via USB port on the PC or notebook:
1. Switch on your computer.
2. Connect the USB data cable and the USB power cable to the enclosure and
connect each cable to a free USB port of your PC.
3. The external drive will be found and the device can be used immediately.
- -