Care & Cleaning; Troubleshooting - ETI aL-90-850-MV Guía De Uso Y Cuidado

Care & Cleaning
CaUTiOn: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from
the fuse box.
□
Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

WarninG: Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem Possible Cause
The fixture will not light. The power is off.
The circuit breaker is off.
There is a bad connection.
There is a defective switch.
The photocell is not working.
The light will not turn off. The photocell is not working.
The fuse blows or the The wires are crossed or the
circuit breaker trips when power wire is grounding out.
the light is turned on.
Corrective Action
Ensure the power supply is on.
Ensure the circuit breaker is in the on position.
Check to ensure proper wire connections are
made. Contact a qualified electrician.
Contact a qualified electrician.
Replace the photocell according to the instructions
in the Maintenance section of this Use and Care
Guide.
Replace the photocell according to the instructions
in the Maintenance section of this Use and Care
Guide.
Check the wire connections.
Contact a qualified electrician or call ETi customer
service at 1-855-384-7754.
8
notes
www.ETiSSL.com
9
Please contact 1-855-384-7754 for further assistance.