Setup Instructions; Remote Controller - JOYTECH AV CONTROL CENTER Guia Del Usuario

EXAMPLE OF A TYPICAL SETUP USING THE AV CONTROL CENTER
TV
NOTE: the input channels 1 to 4 located on the back panel are for reference only. Any suitable device
maybe connected to any input.

SETUP INSTRUCTIONS

1) Connect the AC Power Adapter to the AC 9V IN power connector located on the rear panel of the
AV Control Center
2) Connect the output/s of the AV Control Center to your television, using either the SCART, S-Video
or Phono cable.
NOTE: If you are using the S-Video cable as the video output, you will need to connect the Phono cable
(white and red) to the television for the audio. S-Video connectors do not carry audio signals.
3) Connect your AV devices to input's 1 to 4 ensuring the power is switched off on all devices before
connecting.
4) Switch on your TV and select the "External" input channel. (Refer to your television user guide for
more details)
5) Switch on the AV Control Center by either pressing the Power / Standby button at the front of the AV
Control Center or by using the Remote Controller. The standby button will change to green when on.
6) The first input indicator to illuminate will be input 1. You can select other inputs by pressing the
SELECT button repeatedly or by using the remote controller.

REMOTE CONTROLLER

You can select other inputs by pressing the select button repeatedly or by using the remote controller.
Select the desired input channel by pressing the corresponding number on the keypad.
You can turn the AV Control Center back to standby by pressing the standby button on the remote.
To change the battery, follow the diagram on the back of the Remote Controller. Observe the polarity
when changing the battery (use battery model: CR2025 3V).
DVD PLAYER
SATELLITE RECEIVER
VCR
GAMES CONSOLE
STEREO HI FI