Programming; Semi-Manual Programming; Manual Programming (Search Code By Manufacturer) - Steren RM-30 Manual De Instrucciones

4. PROGRAMMING

- Manual programming (search code by manufacturer)

1. In the programming codes section, locate the available code to control the component.
2. Manually turn on the component (TV, VCR, etc.).
3. Press the SET button until the red LED turns on.
6. Press CH▲/▼ keys to perform a test, if equipment is controlled, press the ENTER key to
fi nish and record the code in the memory of the remote control.
In case of functions to operate incorrectly or that the code is not supported, you must
program the remote with a different code that corresponds to your device.
Recommendations:
-If no code in the list work properly (or the brand of your device is not on the list), use the
semi-manual programming method.
- When you want to confi gure devices that do not have the channel ▲/▼ function, you can
use the Play button on VCR devices or Vol +/- on others.
4. Press the button of the devicer that you want to program, the
selected button indicator will activate.
5. Enter the programming code for the component brand.
9